clad material
英 [klæd məˈtɪəriəl]
美 [klæd məˈtɪriəl]
网络 覆层材料; 包覆材料
双语例句
- Preparation and interface characterization of cermet-steel clad material
金属陶瓷-钢覆层材料制备及其界面表征 - The transverse stress of clad material was analyzed with the mixing rule, and the results show that the yield stress, tensile stress and the thickness ratio obey exponent function.
研究了陶瓷微粉含量对其介电性能的影响以及介电性能的频率和温度特性，并用介质混合法则对其介电常数进行拟合分析。 - And presents two overlay welding processes using strip to obtain a clad material: submerged arc strip cladding ( SAC) and electric slag strip cladding ( ESC).
而且也给出了获得堆焊材料的两种带极堆焊工艺：一种是埋弧带极堆焊（SAC）；另一种是电渣带极堆焊工艺（ESC）。 - The welding parameters of base plate and clad plate refer to those of the same base material and clad material respectively.
基层的焊接工艺参数按同种基层材料焊接的工艺参数确定。 - The work piece can be clad with lagging materials immediately after overlay and adopt slow cooling method on the basis of different principle material and complicated shape of the work piece.
根据工基体材质的不同情况和工件形状的复杂程序，也可采用堆焊后立即有保温材料包覆，然后缓冷的处理方法。 - Application of explosively welded copper/ steel clad material in EDM
铜/钢爆炸复合材料在电火花加工中的应用 - Paper-phenolic copper clad laminate is a main raw material of consumer electronics, information and telecommunication devices.
纸基材酚醛树脂铜面积层板是现今民生消费性电子产品和相关资讯、通讯周边产品的关键材板。 - The mechanical properties and failure patterns of the clad material are investigated with the method of experiment and theory.
采用理论与试验相结合的方法研究了这类材料的力学性能与主要失效方式。 - For welded seams in clad material, filler metals selected from the following table shall be used.
对于复层上已焊过的接缝应从下表选用填充金属。 - Study on Preparation and Properties of Mo_2FeB_2 Cermets-steel Clad Material
Mo2FeB2金属陶瓷-钢覆层材料的制备及性能研究 - The semi leaky modes can also exist in the single clad optical fiber in which the core material is achiral and the cladding material is chiral.
当只有包层中有手征时，单包层手征光纤中也存在半漏模。 - Polyimide Copper Clad Laminates Using Different Reinforcing Material
采用不同增强材料的聚酰亚胺覆铜板 - Clad material, which is a new type material, has become one of research focus in material field because of its good performance.
复层材料作为一种新型材料，由于它的良好的使用性能，已成为现代工业发展的需要，是近年来材料科学的研究热点之一。 - To the same cladding material part under the same condition, a principle that the press strength of the material of the clad, but not the extension strength of the substrate material should be as the design criterion is proposed.
提出对该硬质覆层材料零件进行结构设计时，如果覆层受压，应以覆层部分材料的抗压强度而不是基体材料的抗拉强度作为设计准则。 - Introduces the characteristics and performance of a new type of copper clad steel material, compares and describes four processing techniques for copper clad steel and analyzes the actual application status of copper clad material in connection with the application of it in the project.
介绍了新型的铜包钢材料的特点和性能指标，对铜包钢的4种加工工艺方法进行了对比说明，并结合铜包钢材料在工程实际中的使用情况进行了分析。 - In ultrasonic testing on under built up welding clad cracks in stainless steel, the model of ultrasonic signal is presented by analyzing Lipschitz for material noise, crack wave and edge reproduced wave in C α space.
在不锈钢堆焊层层下裂纹的超声检测中，根据噪声、材料杂波、裂纹回波和楞边回波等在Cα空间中奇异度大小（Lipschitz常数α）的不同，提出了相应的超声信号模型。 - A Study on Deformation Regularity of Extrusion Moulding for Cooper& clad Aluminum Bimetal Material
Cu/Al双金属材料挤压成形的变形规律研究 - Taking FeB, Mo and Fe powder as main materials, Mo_2FeB_2 cermets-steel clad material was prepared by liquid phase sintering in vacuum furnace on steel substrate, and the interface structure, abrasive resistance and interface compatibility of the material was studied.
以FeB、Mo、Fe等粉末为主要原材料，采用真空液相烧结技术，制备了Mo2FeB2金属陶瓷-钢覆层材料，并对其界面组织、耐磨性和界面相容性进行了研究。 - Noble/ base clad strips are a key material of commutator and brush of micro electric machine. It plays an important role in the quality of the micro-motor.
贵廉金属镶嵌复合材料是直流微电机换向器及电刷的关键材料，它对电机性能起着重要的作用。 - A model is developed for the ultrasonic signal testing on under clad crack of stainless steel, by analyzing Lipschitz α of material noise, crack wave and edge reproduced wave in C a space.
根据噪声、材料杂波、裂纹回波、楞边回波等在Cα空间中Lipschitz常数α的差异提出了在不锈钢堆焊层下裂纹的超声检测信号模型。 - Interfacial strength evaluation of semi-solid joining clad material by small punch test
半固态连接复层材料界面强度SP评价 - Manufacturing Ternary Boride Carbide Alloy Clad Material with Liquid Sintering Technology
真空液相烧结法制备三元硼化物硬质合金覆层材料 - Copper clad laminate ( CCL) is the key base material for electrical industry, its property determines the performance of electric products.
覆铜板是电子工业的关键基础材料，其性能的高低将会直接影响电子产品性能的好坏。 - Clad pipe consists of the outer carbon steel material and the inner corrosion-resistant steel material by the way of mechanical or metallurgical complex. It combines the advantages of external high-strength of carbon steel and internal corrosion-resistant property of stainless steel.
复合管是由外碳钢材料和内抗腐蚀合金钢材料按机械或冶金的方式复合而成，它结合了外碳钢高强度和内合金钢抗腐蚀的优点。 - The results of this study provided basis for preparing 6063Al/ MB2/ 6063Al fine multi-layer structure clad material by ARB.
此研究结果对ARB制备6063Al/MB2/6063Al细晶多层结构复合材料提供了依据。 - In laser cladding procedure, clad material and a thin layer of substrate material are melted by using high-power-density laser beam to form a nonporous and crack-free coating. There is a good metallurgical bonding between the substrate and the coating.
激光熔覆是利用高能量密度激光束熔化涂层材料和一薄层基体，形成一个无气孔、无裂纹并能和基体形成良好冶金结合的表面涂层。 - Aluminum/ copper clad composite wire ( shorted by copper-clad aluminum conductor) is a kind of metallic core composite material. The red copper and pure aluminum are used as the sheath and core respectively. And the interface between aluminum and copper is bonded tightly.
铜包铝复合线材（简称铜包铝线）是以铝为芯体，在其上包覆一层紫铜，使铜与铝界面实现结合，成为金属基芯的复合材料。 - Clad metal is a new type of material which is prepared by advanced composite technology with two different alloys, and its performance is very good.
层状金属复合材料是利用先进复合技术将两种或两种以上物理、化学和力学性能不同的合金在界面上实现牢固结合而制备的一种新型复合材料，具有很好的综合性能。